⎝⎛和丰娱乐⎞⎠

Industrial vacuum cleaners for power plants

2019-4-12 16:00:53 Click:

First, the use of industrial vacuum cleaners for power plants

Power plants generally have a lot of distribution boxes and electrical cabinets. If they are not cleaned for a long time, there will be a lot of dust. If the dust is too much, it will cause poor contact on the electrodes. If the temperature is too high, the electrodes will be burned. Discharge could cause an accident. Many power plants generally use high-pressure air to blow them everywhere, which means that they are not cleaned and produce secondary dust and secondary pollution. Industrial vacuum cleaners for power plants use negative pressure vacuuming, which is safe, efficient and pollution-free.

1.Used for cleaning the wall , ground, trench, high-altitude maintenance platform

 

2.Used for cleaning dust in equipment and electric control cabinet

3.Used for cleaning the fly ash

4. Cleaning of coal conveyor corridor of power plant belt conveyor
米高的炉顶粉尘通过真空吸尘管道将粉尘吸到零米位置,由于炉顶粉煤灰数量较大,要保证工作效率,整个工作过程必须连续吸料和卸料。 For mobile dust cleaning and material recovery equipment, the 80m high furnace roof dust can be sucked to the zero meter position through the vacuum suction pipe . Due to the large amount of coal ash on the furnace roof, work efficiency must be ensured and the entire work The process must be continuous suction and discharge. However, due to the limited capacity of its own ash hopper, a continuous unloader must be installed to ensure that the equipment has a large amount and can continuously suck materials. The discharge valve of the continuous discharger can be automatically opened, and the material flows out of the discharge valve and falls into the dust collection trolley or the dust collection bag. The separated dust-containing gas is filtered out by a vacuum cleaner and discharged. Exhausted is clean, up to standard air. We can also put the equipment on the top of the furnace, so that the fly ash discharged from the discharge valve of the continuous discharger can flow directly to the fly ash warehouse or the fly ash tanker through the pipeline.

IMG_256IMG_256 功率为37KW ,吸尘半径可达100米,将设备放到中间,一台设备就可以控制200米的输煤廊道(当然400米的买两台即可),这时的可以理解为中央吸尘系统的主机,多个吸尘口(这样可以减少吸管长度,减轻工人劳动强度)通过一根管道连接到卸料器的进料口,被清理煤粉通过卸料器进行气料分离,分离出来的煤粉经卸料器出料口直接落到皮带机上和其它煤粉一起运走。 Our company's latest SL-2200MC has a power of 37KW and a dust collection radius of 100 meters. By placing the device in the middle, one device can control a 200- meter coal conveyance corridor (of course, you can buy two for 400 meters ) At this time, it can be understood as the host of the central vacuum system. Multiple dust suction ports (which can reduce the length of the suction pipe and reduce the labor intensity of workers) are connected to the inlet of the unloader through a pipe, and the coal powder is cleaned Gas separator is separated through the unloader, and the separated coal powder is directly dropped on the belt conveyor through the discharge port of the unloader and transported with other coal powder.
Working principle and technical parameters of industrial vacuum cleaners for power plants

1.Working principle of industrial vacuum cleaner for power plant

The industrial vacuum cleaner for the power plant is a mobile vacuum cleaner. It adopts the principle of vacuum adsorption to collect loose materials. The operation is simple, and the pulse is blown back and self-cleaned. This equipment can reach 99% for 5μ dust (2500 mesh). 毫米,且可支持24连续工作。 The maximum dust collection particle can reach 40 mm and can support 24 continuous work. The material can be lifted up to 15 meters in height and used horizontally. The material is sucked vertically from top to bottom (because the material can fall freely by gravity), the height is unlimited.

2.Technical parameters of industrial vacuum cleaner

model

KW Motor power ( KW )

m ³ /h Air volume ( m ³ / h )

Pa Wind pressure ( Pa )

mm Overall dimensions ( mm )

SL-400MC

5.5

400

34000

1070x840x1750

SL-600MC

7.5

600

40000

1070x840x1750

SL-800MC

11

800

42000

1070x840x1750

SL-1100MC

18.5

1100

38000

1200x840x1750

SL-800MC-2

2x5.5

800

34000

1100x1100x1750

SL-1200MC-2

2x7.5

1200

42000

1100x1100x1750

SL-1600MC-2

2x11

1600

44000

1200x1200x1750

SL-2200MC-2

2x18.5

2200

40000

1300x1300x1750

SL-1100D

18.5

1100

38000

1600x700x1650

 

七乐彩 欢乐拼三张 手机电玩平台 欢乐拼三张